Lochin Owners Association Forum

moriomon · moriomon

Hi im new to the forum. Im a proud owner of a lochin 33. The boat is out of the water at the moment undergoing a refit for the forthcoming season. I have spent weeks trying to track down a stern tube as the existing one has pitted and holed due to electrolizes. The stern tube is 3ft in lenght, 2 1/2" Overa...

Martin · Martin

Hi Folks Just thought I'd post a pic of my shiny new prop. Probably the last time I'll see it looking like this - almost tempted to get the brasso out, seems a shame to get it wet it is such a thing of beauty. Good news so far. New freeing ports cut and finished. Engine service started. Bad news so far. Deckwa...

Harold Timmer · Harold Timmer

Hi everyone, Well it seems we are now on the downhill stretch with our restoration, at least to the point where we are only a matter of weeks from launching her. Last weekend I finished off the combing. (see photos). Toe rails will be started tomorrow and hopefully finished this week. One side window ba...

Martin · Martin

Hi All At last the boat is out of the shed anf looking good with her new paint job. The surveyor was reasonably happy - until he measured the freeing ports. Turns out I need more, so we are going to cut slots every other frame and re instate two blanked off ports at the stern. Aslo need to upgrade two hoses to...

loophead sea angling · loophead sea angling

Hey people. Just letting you know that the fishing season has started again in co.Clare Ireland. The boat has had a new coat of antifoul put on and the outside of her cleaned for the season. We have had some nice days so far and lukily enough the fish are out there. We were catching whiting, ling, pollock,...

loophead sea angling · loophead sea angling

Hey guys, At the minute i have a 300hp ford sabre. At 2000 rpm i cruise at 10 knots i was just wondering if it would be possible to put a bigger prop on the boat and if it is possible what would be the best size prop for the boat. Cheers, Bernard Heading www.atlanticandshannonfishing.com

Martin · Martin

Hi All Things are finally moving on with Lady Jayne now. She is in a yard at Balvicar on the island of Seil and being well looked after. We only had a short passage from the previous yard but I was impressed with the way she handled the conditions (F5 on the beam and then astern) As you can see from the pics sh...

Harold Timmer · Harold Timmer

Hi all, I went through some of my photo collections and thought you might find the attached photos interesting. Photo #1 - 1988 Rye factory. #2 - Sprayrails mark I. #3 - My dads boat March 1978 in Rye. #4 - London boat show 1978. This Lochin they called a Potter. They only made one, and eventually got sold...

Harold Timmer · Harold Timmer

Hi all, Roof is finished. Polished the original handrails and came up like new. (1200 grade and buff with machine). Fitted vent and hatch. Busy on the combing in the cOkpit at moment. Still really hot here, so glad roof is now done. Regards HT

Harold Timmer · Harold Timmer

Hello all, Sorry it has taken so long, but here are some more photos of the latest work. The superstructure (except the deck) is now all but done. The two side windows need to be taken apart, powdercoated and then re-assembled. The front windows have been done as you can see by photos. It's getting ver...

loophead sea angling · loophead sea angling

Hi everyone. I am new to this forum. I currently own a lochin 33 sportsfisher which i use for angling. I currently own a charter buisness if any of you would like to check it out its www.atlanticandshannonfishing.com If anyone wants to book a day out please contact me . Thank you very much, Bernard Headi...

Martin · Martin

At last I have managed to complete on my new boat. It has taken longer than I expected but I hope it is a case of ''good things come to those who wait'' As you can see from the pic she has had the wheelhouse extended at some time but this will serve my purpose well. There is seating around the back and port side w...

Martin · Martin

Hi everyone, don't know if any of you have come across this site yet, it shows every commercial vessel over 500tons(I think)where it is, where it is going, how fast what type of vessel etc. I live on the Isle of Mull and find it interesting to know which ships I have seen in the Sound of Mull. http://www.a...

gmr_86 · gmr_86

Does anyone have pictures of information/articles on Lochin's that were used for commercial fishing?

Stugsy · Stugsy

I thought id wish everyone Happy New Year with better weather and lighter winds than we saw in 2008! How are people getting on - are your vessels still in the water or like Sundance up on the hard for planned and preventative maintenance? Insurance survey due again for us and plenty tidying up and odds...

chas · chas

It's that season when, The bearded fat man rides again. Merry Christmas everybody Ho Ho Ho!

Blue Swell · Blue Swell

Hi All, Well with the 60/40 split on duty allowance for propulsion and domestic i have removed 2 Heater units fitted to Blue Swell for an upgrade. These units were Volvo and basically blown warm air across heater matrix. Both units were leaking coolant and only 1 fan worked. So with decision made a...

Harold Timmer · Harold Timmer

Hi all, When I took the original factory fitted lock off (wheelhouse door) of course after 22years it fell to pieces in my hands. I haven't yet been able to find anything similar that is of a good marine quality. Any suggestions? Geoff, it must be a very similar lock to what you have got. Same era. M...

Blue Swell · Blue Swell

Hi All Havent posted for a while good to see some great input and discussions thought i would ask the panel their thoughts on this one. I have a Plastimo 6 man canister liferaft overdue service and inherited with boat. Now 10 years overdue service and have been quoted approx £300 to be serviced. B...

Harold Timmer · Harold Timmer

Hello all, We have made some progress lately on our Lochin restoration. The portside hull has now been regelcoated and detailed. We have posted some photos of the process in action as well as the finished product. We have tried to get some reflections on the hull as it is difficult to show the true fin...

robbiediesel · robbiediesel

Wow, just saw this on Safehaven marine website, one of their catemarans, okay i know it was a force 8 with 3 metre waves it says, but should the whole nose really go under like that?? Scary stuff! -- Edited by robbiediesel at 20:15, 2008-10-07

Blue Swell · Blue Swell

Was aboard the Tall Ship Lord Nelson for a course yesterday unfortuanately the day sail was cancelled after leaving Portsmouth due to strong wind warning in the Solent. Portsmouth pilot was aboard initially from leaving port then when in Southampton water the pilots swap over to Southampton pilot...

robbiediesel · robbiediesel

Hi to everyone, thought i would post a few pics of our run on the boats last weekend to Handa Island. What a fantastic day we all had. My Dad took the Lochin & I took the Rib (blue & yellow Tornado) accross from the Isle of Lewis to the mainland and spent most of the day on Handa admiring the amazing cl...

Stugsy · Stugsy

Good day all, I thought id post a few pics of the one weekend of summer had this year. Got a trip down to the Ecrehous reef which is between Jersey and France and a two hour steam from Guernsey. Good weather is essential even in a Lochin as 7knot tide streams and a forty foot tidal range makes life interest...

dave p · dave p

hello lads i have been looking at a 1986 lochin 33 sports fisherman with a 300hp john deere engine . i know john deere tracters are ment to be the bee's knee's but are they any good as a marine engine. is it easy to get parts and service parts and are they dear to run . dave p

chas · chas

Some questions for Simon and Roger and a few thoughts of my own. Simon and Roger: 1. Have you considered contacting the people you have on your books to inform them of the forums existance? 2. This forum doesn't seem to send out automatic e mail messages to inform you when there has been a reply to y...

robbiediesel · robbiediesel

Does anybody know of any trailer manufacturers that make a trailer suitable for carrying the Lochin 33? Just a simple un-braked trailer to pull the boat up & down the slipway and into the car park at our harbour using a Large Tractor. The crane bills up here are crippling & I often thought of bui...

dave p · dave p

hello lads a bit of information regarding fuel tanks. my mate has got a lochin 33 sports fisherman with a iveco 330 hp ,cruise at 16 knots , 22knots flat out with the fuel tank behind the engine he could never see over the bow properly even with a decent set of trim-tabs . so last year he had the bo...

robbiediesel · robbiediesel

I took this photo at Ribex this year. Wonder how a Lochin 33 would go with 2 of them on its Transom? Wouldnt like to pay the fuel bill Though!! I beleive a 400hp version based on the same block is due to be released shortly. NUTS! -- Edited by robbiediesel at 16:43, 2008-08-20 -- Edited by robbiediesel at 16...

robbiediesel · robbiediesel

Found this on an american site, I'd loved to have seen the landing!!!

Topic		Started By	Replies	Views	Last Post
	Stern Tube for a lochin 33 (Preview) Hi im new to the forum. Im a proud owner of a lochin 33. The boat is out of the water at the moment undergoing a refit for the forthcoming season. I have spent weeks trying to track down a stern tube as the existing one has pitted and holed due to electrolizes. The stern tube is 3ft in lenght, 2 1/2" Overa...	moriomon	0	1225	Apr 15, 2009 by moriomon
	New prop (Preview) Hi Folks Just thought I'd post a pic of my shiny new prop. Probably the last time I'll see it looking like this - almost tempted to get the brasso out, seems a shame to get it wet it is such a thing of beauty. Good news so far. New freeing ports cut and finished. Engine service started. Bad news so far. Deckwa...	Martin	1	1394	Apr 6, 2009 by chas
	Getting closer! (Preview) Hi everyone, Well it seems we are now on the downhill stretch with our restoration, at least to the point where we are only a matter of weeks from launching her. Last weekend I finished off the combing. (see photos). Toe rails will be started tomorrow and hopefully finished this week. One side window ba...	Harold Timmer	4	1237	Mar 26, 2009 by chas
	Getting there (Preview) Hi All At last the boat is out of the shed anf looking good with her new paint job. The surveyor was reasonably happy - until he measured the freeing ports. Turns out I need more, so we are going to cut slots every other frame and re instate two blanked off ports at the stern. Aslo need to upgrade two hoses to...	Martin	5	1398	Mar 24, 2009 by Martin
	Fishing has started again (Preview) Hey people. Just letting you know that the fishing season has started again in co.Clare Ireland. The boat has had a new coat of antifoul put on and the outside of her cleaned for the season. We have had some nice days so far and lukily enough the fish are out there. We were catching whiting, ling, pollock,...	loophead sea angling	1	1215	Mar 24, 2009 by chas
	Advice on propeller size (Preview) Hey guys, At the minute i have a 300hp ford sabre. At 2000 rpm i cruise at 10 knots i was just wondering if it would be possible to put a bigger prop on the boat and if it is possible what would be the best size prop for the boat. Cheers, Bernard Heading www.atlanticandshannonfishing.com	loophead sea angling	2	1445	Mar 11, 2009 by Martin
	Progress (Preview) Hi All Things are finally moving on with Lady Jayne now. She is in a yard at Balvicar on the island of Seil and being well looked after. We only had a short passage from the previous yard but I was impressed with the way she handled the conditions (F5 on the beam and then astern) As you can see from the pics sh...	Martin	5	1574	Mar 4, 2009 by Martin
	Original factory photos (Preview) Hi all, I went through some of my photo collections and thought you might find the attached photos interesting. Photo #1 - 1988 Rye factory. #2 - Sprayrails mark I. #3 - My dads boat March 1978 in Rye. #4 - London boat show 1978. This Lochin they called a Potter. They only made one, and eventually got sold...	Harold Timmer	2	1562	Mar 3, 2009 by Blue Swell
	More restoration photos (Preview) Hi all, Roof is finished. Polished the original handrails and came up like new. (1200 grade and buff with machine). Fitted vent and hatch. Busy on the combing in the cOkpit at moment. Still really hot here, so glad roof is now done. Regards HT	Harold Timmer	2	1285	Mar 3, 2009 by Harold Timmer
	Restoration update (Preview) Hello all, Sorry it has taken so long, but here are some more photos of the latest work. The superstructure (except the deck) is now all but done. The two side windows need to be taken apart, powdercoated and then re-assembled. The front windows have been done as you can see by photos. It's getting ver...	Harold Timmer	12	2061	Feb 26, 2009 by Martin
	Hey people check this out (Preview) Hi everyone. I am new to this forum. I currently own a lochin 33 sportsfisher which i use for angling. I currently own a charter buisness if any of you would like to check it out its www.atlanticandshannonfishing.com If anyone wants to book a day out please contact me . Thank you very much, Bernard Headi...	loophead sea angling	4	1220	Feb 13, 2009 by loophead sea angling
	New boat (Preview) At last I have managed to complete on my new boat. It has taken longer than I expected but I hope it is a case of ''good things come to those who wait'' As you can see from the pic she has had the wheelhouse extended at some time but this will serve my purpose well. There is seating around the back and port side w...	Martin	10	1610	Feb 7, 2009 by Martin
	A I S site (Preview) Hi everyone, don't know if any of you have come across this site yet, it shows every commercial vessel over 500tons(I think)where it is, where it is going, how fast what type of vessel etc. I live on the Isle of Mull and find it interesting to know which ships I have seen in the Sound of Mull. http://www.a...	Martin	0	1041	Jan 14, 2009 by Martin
	Lochin's used for commercial fishing. (Preview) Does anyone have pictures of information/articles on Lochin's that were used for commercial fishing?	gmr_86	0	1031	Jan 12, 2009 by gmr_86
	Happy new year to all - plans for 2009? (Preview) I thought id wish everyone Happy New Year with better weather and lighter winds than we saw in 2008! How are people getting on - are your vessels still in the water or like Sundance up on the hard for planned and preventative maintenance? Insurance survey due again for us and plenty tidying up and odds...	Stugsy	2	954	Jan 5, 2009 by chas
	Merry Christmas (Preview) It's that season when, The bearded fat man rides again. Merry Christmas everybody Ho Ho Ho!	chas	4	949	Jan 5, 2009 by chas
	Heating (Preview) Hi All, Well with the 60/40 split on duty allowance for propulsion and domestic i have removed 2 Heater units fitted to Blue Swell for an upgrade. These units were Volvo and basically blown warm air across heater matrix. Both units were leaking coolant and only 1 fan worked. So with decision made a...	Blue Swell	1	927	Dec 15, 2008 by chas
	Door locks (Preview) Hi all, When I took the original factory fitted lock off (wheelhouse door) of course after 22years it fell to pieces in my hands. I haven't yet been able to find anything similar that is of a good marine quality. Any suggestions? Geoff, it must be a very similar lock to what you have got. Same era. M...	Harold Timmer	4	934	Dec 10, 2008 by chas
	Liferafts (Preview) Hi All Havent posted for a while good to see some great input and discussions thought i would ask the panel their thoughts on this one. I have a Plastimo 6 man canister liferaft overdue service and inherited with boat. Now 10 years overdue service and have been quoted approx £300 to be serviced. B...	Blue Swell	7	1019	Nov 12, 2008 by Blue Swell
	Lochin 33 restoration update (Preview) Hello all, We have made some progress lately on our Lochin restoration. The portside hull has now been regelcoated and detailed. We have posted some photos of the process in action as well as the finished product. We have tried to get some reflections on the hull as it is difficult to show the true fin...	Harold Timmer	8	1973	Oct 21, 2008 by chas
	Submarine? (Preview) Wow, just saw this on Safehaven marine website, one of their catemarans, okay i know it was a force 8 with 3 metre waves it says, but should the whole nose really go under like that?? Scary stuff! -- Edited by robbiediesel at 20:15, 2008-10-07	robbiediesel	1	937	Oct 8, 2008 by chas
	Southampton Pilot (Preview) Was aboard the Tall Ship Lord Nelson for a course yesterday unfortuanately the day sail was cancelled after leaving Portsmouth due to strong wind warning in the Solent. Portsmouth pilot was aboard initially from leaving port then when in Southampton water the pilots swap over to Southampton pilot...	Blue Swell	0	758	Oct 5, 2008 by Blue Swell
	Handa Island (Preview) Hi to everyone, thought i would post a few pics of our run on the boats last weekend to Handa Island. What a fantastic day we all had. My Dad took the Lochin & I took the Rib (blue & yellow Tornado) accross from the Isle of Lewis to the mainland and spent most of the day on Handa admiring the amazing cl...	robbiediesel	3	931	Sep 26, 2008 by robbiediesel
	September Ecrehous (Preview) Good day all, I thought id post a few pics of the one weekend of summer had this year. Got a trip down to the Ecrehous reef which is between Jersey and France and a two hour steam from Guernsey. Good weather is essential even in a Lochin as 7knot tide streams and a forty foot tidal range makes life interest...	Stugsy	3	799	Sep 26, 2008 by Stugsy
	john deere (Preview) hello lads i have been looking at a 1986 lochin 33 sports fisherman with a 300hp john deere engine . i know john deere tracters are ment to be the bee's knee's but are they any good as a marine engine. is it easy to get parts and service parts and are they dear to run . dave p	dave p	4	1192	Sep 6, 2008 by Stugsy
	What do we want on this forum? Suggestions please (Preview) Some questions for Simon and Roger and a few thoughts of my own. Simon and Roger: 1. Have you considered contacting the people you have on your books to inform them of the forums existance? 2. This forum doesn't seem to send out automatic e mail messages to inform you when there has been a reply to y...	chas	9	1481	Sep 2, 2008 by chas
	Lochin 33 Trailer (Preview) Does anybody know of any trailer manufacturers that make a trailer suitable for carrying the Lochin 33? Just a simple un-braked trailer to pull the boat up & down the slipway and into the car park at our harbour using a Large Tractor. The crane bills up here are crippling & I often thought of bui...	robbiediesel	1	892	Aug 29, 2008 by Alan
	diesel tank (Preview) hello lads a bit of information regarding fuel tanks. my mate has got a lochin 33 sports fisherman with a iveco 330 hp ,cruise at 16 knots , 22knots flat out with the fuel tank behind the engine he could never see over the bow properly even with a decent set of trim-tabs . so last year he had the bo...	dave p	2	784	Aug 22, 2008 by dave p
	How Americans would power a Lochin 33..??? (Preview) I took this photo at Ribex this year. Wonder how a Lochin 33 would go with 2 of them on its Transom? Wouldnt like to pay the fuel bill Though!! I beleive a 400hp version based on the same block is due to be released shortly. NUTS! -- Edited by robbiediesel at 16:43, 2008-08-20 -- Edited by robbiediesel at 16...	robbiediesel	1	683	Aug 20, 2008 by chas
	Crazy Boating!!! (Preview) Found this on an american site, I'd loved to have seen the landing!!!	robbiediesel	2	642	Aug 18, 2008 by dave p
«First < 1 … 1287 1288 1289 \| Page of 1289 sorted by